For most families, showering is the main or even the only way to take a bath. Therefore, whether the shower is good or not is directly related to the happiness of bathing.

Generally, there are two installation forms for showers: exposed showers and concealed showers.

The most common type is surface-mounted shower. All the pipe parts are installed on the wall and can be seen. The biggest advantage is that it is easy to install and easy to maintain. Of course, the disadvantage is that it takes up bathroom space, is visually unsightly, and is easy to bump.   During hydropower transformation, the hot and cold water pipes will be pre-embedded in advance, and they can be installed directly on the wall later.

In addition, there are two types of concealed showers: top shower and side shower. The side spray shower is also a massage shower, the back massage is super cool!

The wall of the concealed shower needs a non-load-bearing wall with deep and long grooves.   Generally speaking, a new light-body wall is built for installation. Based on the tile surface, the minimum opening and closing of the mixing valve is 260×210 mm; the embedded depth is recommended to be 60 mm to 70 mm; the width is about 295 to 305 mm; and the height is between 105 to 115 mm. The top spray shower should be connected by a water pipe from under the ceiling, and a height of about 10 cm should be left from the ceiling.

Regarding the water outlet switch of the shower, there are two main ways: one is to lift the pressure switch to output water (adjust the size of the water while adjusting the temperature of the water); the other is to rotate the switch to output the water.

Here I want to remind everyone to avoid the pit, the rotating switch, when you have shower gel or shampoo on your hand, it will be particularly slippery and it will be very hard to use. Of course, if the rotary switch is very flexible, has a large friction force, and a slippery hand does not affect its use, then there is no need to worry.